Advanced Installer Architect

Advanced Installer is a Windows Installer authoring tool. It offers a user-friendly and easy to use Graphical User Interface for creating and maintaining installation packages (EXE, MSI, etc.) based on Windows Installer technology.

Advanced Installer simplifies the process of building Windows Installer packages by providing a very easy to use, high level interface to underlying technology. The program implements all the Windows Installer rules and follows all the best practices.

With this simple, intuitive interface, building a Windows Installer package will take just a few minutes. You just have to follow a few simple steps, hit the Build button and your installer is ready to use.

Key Features Of Advanced Installer:

MSI:

• Create valid MSI setups for your applications respecting all written and unwritten Windows

UAC rules :

• Build installers that run flawlessly on Windows 7 / Vista

Upgrades:

• Detect and upgrade older versions of your product installed on the user’s machine. Prevent installs over new ones

Side-by-Side:

• Create packages for different versions of your application that can be installed simultaneously and run side by side

Imports:

• Import from Visual Studio, InstallShield LE, WiX, Eclipse, Inno Setup, NSIS and regular MSI / MSM packages

Fonts:

• Register fonts in the Windows OS. Specify registration names for non-TrueType fonts

Environment Variables:

• Create, append or prepend user or system environment variables

Autoregister:

• Auto registration, for files that support it, can be scheduled at installation time

Files and Folders:

• Install and uninstall files and folders. Set attributes, create shortcuts

Registry:

64-bit registry keys and entries :

• Build setups that run and install on 32-bit processors or on the latest 64-bit Intel and AMD CPUs

Template projects:

• Create templates based on your current project and ready-to-use for your future projects

Add / Remove:

• Customize your application’s listing in the "Add / Remove Programs" page of Control Panel

XML projects:

• They can be easily checked into a version control system and shared among multiple developers

Command Line:

• Build your release packages in fully automated scripts, such as Make, Ant or NAnt

Run & Log:

• Launch your MSI package while pretty much printing the full Windows Installer log

Launch Conditions:

• Visually specify the necessary conditions (applications, frameworks, etc.) for your package to run

Smart Formatted Editing:

• Formatted Editing (MSI) offers auto-completion reference , syntax and error highlights and resolved value hints

Per-User / Per-machine:

• Create installers that can be installed as required: per-user or per-machine if the user is Administrator

Include Merge Modules:

• Include frameworks, libraries and others prepackaged dependencies into your installers with just a few mouse clicks

Required System

Minimum

• Core 2 class CPU
• 1 GB RAM
• 1366×768 screen resolution
• 2 GB hard drive space

Recommended

• i5 class CPU
• 4 GB RAM
• 1920×1200 screen resolution
• 10 GB hard drive space

Advanced Installer IDE
The following software must be installed on your system in order for Advanced Installer to run correctly:

• Windows 7 or newer
• Latest Windows Platform SDK (optional, required only to build certain types of packages)

Create Install Packages
The MSI or EXE install files that Advanced Installer produces run on the following operating system systems:

• Windows Vista or newer
• Windows Server 2008 or newer

Windows 10 Compatibility
Both Advanced Installer and the EXE / MSI install packages it creates are tested and run on Windows 10.
Windows 10 is fully supported by the latest Advanced Installer release.

Download

Advanced Installer 16.5

Advanced.Installer.Architect.16.x Patch

Activation

1. Run the installer. Do not run the Advanced Installer after the installation is complete. If it is already running, close it.
2. Put under the :
3. Then run , and click the button to complete the activation.
   

Before licensing Advanced Installer, you can evaluate it by downloading a 30-day fully functional trial version. If you decide to purchase the product, you do not need to uninstall the trial version. Just register it using the License Key you will receive with your purchase confirmation email.

Editions

There are four editions of Advanced Installer. Visit our feature comparison matrix to check out the differences.

• Advanced Installer Freeware
• Advanced Installer Professional
• Advanced Installer Enterprise
• Advanced Installer Architect

Compare prices for the available licenses for each edition.

Freeware vs. licensed features

Advanced Installer offers two sets of features: freeware features and licensed features. The feature set is selected by the type of the project you are creating. The "Simple" projects use only freeware features, while the "Professional","Patch" and other projects employ licensed features.

No license is necessary when using only freeware features in "Simple" projects. Install packages created using these features can be freely redistributed and used both in commercial and non-commercial purpose (subject to EULA).

The non-freeware features require a valid license.

Trial

Non-freeware features offer a 30-day trial period, after which you must buy a license in order to keep using them. Otherwise, after the trial period the Build operation will stop working for non-"Simple" projects.

During the trial period, packages created using licensed features may only be used for testing purposes. You may not redistribute them.

How many licenses?

Advanced Installer is licensed per developer. That means you need one license for each developer using the product. Each developer is allowed to install his license on up to 5 computers at the same time, as long as he is the only developer using the Advanced Installer application on those machines.

Also, if you have an unattended software agent/machine which uses the Advanced Installer application (e.g. the build operation is not triggered manually by a developer), then you will need a per-developer license for each one of your software agent (e.g. build server) or a floating license.

Floating Licenses

A floating license is available as an option of the Enterprise and Architect licenses. It can be used by any developer on any machine (non-simultaneous use). You need one floating license for each developer using the product concurrently.

With a licensed version of Advanced Installer, you can create an unlimited number of install packages and you can distribute them royalty free to an unlimited number of users, to be installed on an unlimited number of computers.

Upgrading your license

If you decide you need certain features found in a different Advanced Installer edition, you can purchase a license upgrade at anytime.

Maintenance Plans

• A License gives you the right to unlimited use of the Advanced Installer product.
• A Maintenance Plan gives you access to application updates and technical support.

Each Advanced Installer license purchase includes a free 12-months Maintenance Plan.

Download Advanced Installer 16.5

For initial switch setup, assigning the switch IP address, and powering on information, see the switch getting started guide on Cisco.com.

This chapter contains these topics:

Preparing for Installation

Safety Warnings

This section includes the basic installation caution and warning statements. Read this section before you start the installation procedure. Translations of the warning statements appear in the Regulatory Compliance and Safety Information guide on Cisco.com.

Warning

Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld the metal object to the terminals. Statement 43

Warning

Do not stack the chassis on any other equipment. If the chassis falls, it can cause severe bodily injury and equipment damage. Statement 48

Warning

Ethernet cables must be shielded when used in a central office environment. Statement 171

Warning

Do not work on the system or connect or disconnect cables during periods of lightning activity. Statement 1001

Warning

Read the installation instructions before connecting the system to the power source. Statement 1004

Warning

Class 1 laser product. Statement 1008

Warning

This unit is intended for installation in restricted access areas. A restricted access area can be accessed only through the use of a special tool, lock and key, or other means of security. Statement 1017

Warning

The plug-socket combination must be accessible at all times, because it serves as the main disconnecting device. Statement 1019

Warning

Use copper conductors only. Statement 1025

Warning

This unit might have more than one power supply connection. All connections must be removed to de-energize the unit. Statement 1028

Warning

Only trained and qualified personnel should be allowed to install, replace, or service this equipment. Statement 1030

Warning

Ultimate disposal of this product should be handled according to all national laws and regulations. Statement 1040

Warning

To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended ambient temperature of: <113°F (45°C). Statement 1047

Warning

Installation of the equipment must comply with local and national electrical codes. Statement 1074

Warning

To prevent airflow restriction, allow clearance around the ventilation openings to be at least: 3 inches (7.6 cm). Statement 1076

Note	The grounding architecture of this product is DC-isolated (DC-I).

Installation Guidelines

When determining where to install the switch, verify that these guidelines are met:

• Clearance to the switch front and rear panel meets these conditions:

  • Front-panel LEDs can be easily read.

  • Access to ports is sufficient for unrestricted cabling.

  • AC power cord can reach from the AC power outlet to the connector on the switch rear panel.

  • The pluggable transceiver module minimum bend radius and connector length is met. See the Cisco pluggable transceiver module documentation for more information.

• Cabling is away from sources of electrical noise, such as radios, power lines, and fluorescent lighting fixtures. Make sure that the cabling is safely away from other devices that might damage the cables.

• For switches with the optional 1100 W or 1900 W power supply module, first rack-mount the switch before installing the power-supply module.

• Make sure power supply modules and fan modules are securely inserted in the chassis before moving the switch.

• When connecting or disconnecting the power cord on a switch installed with a 350 W or a 715 W power supply that is installed above or below a 1100 W or 1900 W power supply equipped switch, you might need to remove the 1100 W power supply from the switch to access the power cord.

• Airflow around the switch and through the vents is unrestricted.

• For copper connections on Ethernet ports, cable lengths from the switch to connected devices can be up to 328 feet (100 meters).

• Temperature around the unit does not exceed 113°F (45°C). If the switch is installed in a closed or multirack assembly, the temperature around it might be greater than normal room temperature.

• Humidity around the switch does not exceed 95 percent.

• Altitude at the installation site is not greater than 10,000 feet.

• Cooling mechanisms, such as fans and blowers in the switch, can draw dust and other particles causing contaminant buildup inside the chassis, which can result in system malfunction. You must install this equipment in an environment free from dust and foreign conductive or corrosive materials.

Shipping Box Contents

The shipping box contains the model of the switch you ordered and other components needed for installation. Some components are optional, depending on your order.

Note	Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative or reseller for instructions.

Note	The item is orderable.

Tools and Equipment

Obtain these necessary tools:

• A Number-2 Phillips screwdriver.

Verifying Switch Operation

Before you install the switch in a rack, or on a table or shelf, power on the switch and verify that it passes POST.

To power on the switch, plug one end of the AC power cord into the switch AC power connector, and plug the other end into an AC power outlet.

As the switch powers on, it begins the POST, a series of tests that runs automatically to ensure that the switch functions properly. LEDs can blink during the test. The SYST LED blinks green, and the other LEDs remain solid green.

When the switch completes POST successfully, the SYST LED remains green. The other LEDs turn off and then reflect the switch operating status. If a switch fails POST, the SYST LED turns amber.

POST failures are usually fatal. Call Cisco technical support representative if your switch fails POST.

After a successful POST, unplug the power cord from the switch and install the switch in a rack, on a table, or on a shelf.

Warning

Attach only the following Cisco external power system to the switch: Cisco XPS 2200 Statement 387

Planning a Switch Data Stack

Cisco Catalyst 9300 switches can share bandwidth by using data stacking. The following table lists the supported stacking options:

Mixed stacking between C9300X and C9300 switches are supported at StackWise-480 speed. However, you cannot stack fixed uplink switches with modular uplink switches or other Cisco Catalyst switches.

Switch Stacking and Power Stacking Guidelines

Before connecting the switches in a stack, ensure that you read these stacking guidelines:

• Size of the switch and any optional power supply module. The 1100 W/1900 W power supply module is longer than the other modules. Stacking switches with the same power supply modules together makes it easier to cable the switches.

• Length of cable. Depending on the configurations that you have, you might need different sized cables. If you do not specify the length of the StackWise cable, the 0.5 meter cable is supplied. If you need the 1 meter cable or the 3 meter cable, you can order it from your Cisco supplier. For cable part numbers, see StackWise Accessories. The Data Stack Cabling Configurations provides examples of recommended configurations.

• For rack mounted switch stacks that are members of a StackPower stack as well as a data stack, see Planning a StackPower Stack.

• Up to four switches can be configured in a StackPower stack using the StackPower connector at the rear of the switch. However, with XPS-2200, you can configure up to nine C9300 switches in a StackPower stack. Currently, C9300X switches do not support XPS-2200.

Data Stack Cabling Configurations

This is an example of a recommended configuration that uses the supplied 0.5-meter StackWise cable. In this example, the switches are stacked in a vertical rack or on a table. This configuration provides redundant connections. The configuration example uses the supplied 0.5-meter StackWise cable. The example shows the full-ring configuration that provides redundant connections.

This example shows a recommended configuration when the switches are mounted side-by-side. Use the 1-meter and the 3-meter StackWise cables to connect the switches. This configuration provides redundant connections.

Data Stack Bandwidth and Partitioning Examples

This section provides examples of data stack bandwidth and possible data stack partitioning. The figure shows a data stack of switches that provides full bandwidth and redundant StackWise cable connections.

This figure shows an example of a stack of switches with incomplete StackWise cabling connections. This stack provides only half bandwidth and does not have redundant connections.

The figures below show data stacks of switches with failover conditions. In this figure, the StackWise cable is bad in link 2. Therefore, this stack provides only half bandwidth and does not have redundant connections.

In this figure, link 2 is bad. Therefore, this stack partitions into two stacks, and the top and bottom switches become the active switch in the stack. If the bottom switch is a member (not active or standby switch), it reloads.

Power-On Sequence for Switch Stacks

Consider these guidelines before you power on the switches in a stack:

• The sequence in which the switches are first powered on might affect the switch that becomes the stack master.

• There are two ways to elect an active switch:
  • If you want a particular switch to become the active switch, configure it with the highest priority. Among switches with same priority, the switch with the lowest MAC address becomes the active switch.

  • If you want a particular switch to become the active switch, power on that switch first. This switch remains the active switch until a reelection is required. After 2 minutes, power on the other switches in the stack. If you have no preference as to which switch becomes the active switch, power on all the switches in the stack within 1 minute. These switches participate in the active switch election. Switches powered on after 2 minutes do not participate in the election.

  If changes are made to the stack without powering down the switches, the following results can occur:

• If two operating partial ring stacks are connected together using a stack cable, a stack merge can take place. This situation reloads the whole stack (all switches in the stack).

• If some switches in the stack are completely separated from the stack, a stack split can occur.
• A stack split can occur on a full ring stack if:
  • More than one running switch is removed without powering down.
  • More than one stack cable is removed without powering down.

• A stack split can occur in a partial ring stack if:
  • A switch is removed without powering down.
  • A stack cable is removed without powering down.

• In a split stack, depending on where the active and standby switches are located, either two stacks might be formed (with the standby taking over as the new active switch in the newly formed stack) or all the members in the newly formed stack might reload.

Note	These results depend on how the switches are connected. You can remove two or more switches from the stack without splitting the stack.

For conditions that can cause a stack reelection or to manually elect the active switch, see the stacking software configuration guide on Cisco.com at this URL: http://www.cisco.com/go/c9300.

Planning a StackPower Stack

StackPower Stacking Guidelines

You can configure a StackPower stack for either power sharing or redundancy. In power-sharing mode, the power of all the power supplies in the stack is aggregated and distributed among the stack members.

In redundant mode, when the total power budget of the stack is calculated, the wattage of the largest power supply is not included. That power is held in reserve and used to maintain power to switches and attached devices when one power supply fails. Following the failure of a power supply, the StackPower mode becomes power sharing.

Note	Power-sharing mode is the recommended configuration for Cisco Catalyst 9300 Series Switches.

For general concepts and management procedures for switch power stacks, see the Software Configuration Guide on Cisco.com.

Before connecting the switches in a power stack, read the following guidelines:

• C9300 and C9300X switches support Cisco StackPower providing up to 1000 W of power in nominal conditions and 2400 W of power in failure conditions across a power stack. Cisco StackPower is not supported in C9300L switches.

• A switch power stack can include a maximum of four switches in a ring topology and nine switches in a star topology. Currently, C9300X switches do not provide support for XPS-2200.

• Size of the switch and any optional power supply module. The 1100 W/1900 W power supply module is 1.5 inches (3.81 cm) longer than the other modules, and with the attached cable retention clip, it extends 3 inches (7.62 cm) from the switch chassis. Stacking switches with the same power supply modules together makes it easier to cable the switches. For switch dimensions, see Appendix A, “Technical Specifications.”

• Length of cable. Depending on the configurations that you have, you might need different sized cables. If you do not specify the length of the StackPower cable, the 0.3 meter cable is supplied. If you need the 1.5 meter cable, you can order it from your Cisco supplier. For cable part numbers, see StackPower Connector. The StackPower Cabling Configurations provides examples of recommended configurations.

• For rack mounted switch stacks that are members of a data stack and a StackPower stack, see Switch Stacking and Power Stacking Guidelines

StackPower Cabling Configurations

This section describes the recommended cabling configurations for a StackPower stack. There are two types of StackPower cables.

The cable in the figure connects a switch to another switch in a power stack or with an XPS. StackPower cables have color bands on the cable ends:

• The cable end with the green band can connect only to a switch.

• The cable end with the yellow band can connect to a switch or an XPS.

The cable is available in two lengths.

This figure shows a ring configuration using both of the supplied 0.3-meter StackPower cables and one 1.5-meter cable. In the examples that follow, the switches are stacked in a vertical rack or on a table.

This figure shows 8 switches connected in a star topology.

StackPower Partitioning Examples

These figures show StackPower stacks of switches with failover conditions.

In the following figure, the StackPower cable 2 is faulty. This is considered a broken ring and is a fault condition. Power is still shared across the stack, but this condition will place a limitation on power budgeting and the number of high priority ports it can protect in the case of any further failures such as failure of power supply, AC mains, StackPower port and so on. StackPower is not intended for secondary failures and hence restoration of the failed component or power should be done immediately.

In the following figure, StackPower port B on the center switch has failed and the stack partitions into two stacks. The top two switches share power, and the bottom switch is now a separate stack. After initial failure of cable 2, any further failure of a port is considered a double fault, which a StackPower cannot handle. A double fault could result in unintended high priority ports being shut. If you are unable to physically restore a bad cable, adjust port priorities and restore any offline supplies, as available.

Installing the Switch

Rack-Mounting

Installation in racks other than 19-inch racks requires a bracket kit not included with the switch.

Warning

To prevent bodily injury when mounting or servicing this unit in a rack, you must take special precautions to ensure that the system remains stable. The following guidelines are provided to ensure your safety: This unit should be mounted at the bottom of the rack if it is the only unit in the rack. When mounting this unit in a partially filled rack, load the rack from the bottom to the top with the heaviest component at the bottom of the rack. If the rack is provided with stabilizing devices, install the stabilizers before mounting or servicing the unit in the rack. Statement 1006

The following figure shows the standard 19-inch brackets and other optional mounting brackets. You can order the optional brackets from your Cisco sales representative.

Attaching the Rack-Mount Brackets

Before you begin

Procedure

Step 1

Use two Phillips flat-head screws to attach the long side of the bracket to each side of the switch for the front or rear mounting positions. 1 19-inch bracket 3 19-inch extension rail 2 Number-8 Phillips flat-head screws (48-2927-01) - -

Step 2

For Network Equipment-Building Standards (NEBS) compliant installations, perform the following steps: Stick the labels available with CAT-A-AIRFLOW kit on to each side of the switch as shown in the following illustration. Make sure you align the holes in the labels with the screw holes in the chassis. Secure the brackets to the chassis using the flat head screws provided with the bracket. Note  NEBS is supported only with four-point mounting. 1 Number-8 Phillips flat-head screws 3 NEBS-compliant CAT-A-AIRFLOW kit 2 19-inch bracket - -

Mounting the Switch in a Rack

Procedure

Step 1	Use the four supplied Phillips machine screws to attach the brackets to the rack.
Step 2	Use the black Phillips machine screw to attach the cable guide to the left or right bracket. 1 Phillips machine screw, black 3 Number-12 or number-10 Phillips machine screws 2 Cable guide - -

Installing the Switch on a Table or Shelf

Procedure

After Switch Installation

• Configure the switch using the Web User Interface. For more information, see "Configuring the Switch Using the Web User Interface" topic in the Software Configuration Guide.

• Connect the StackPower and StackWise ports.

• Install the power cord retainer (optional).

• Connect the required devices to the switch ports.

• Turn on the power supply switches to power up the system. While powering up, the switch performs a series of bootup diagnostic tests.

  Note	The switch is designed to boot up in less than 30 minutes, provided that the neighboring devices are in fully operational state.

• Verify port connectivity after connecting devices to the switch ports. The LED turns green when the switch and the attached device have a link.

Connecting the StackWise Cables

Before connecting the StackWise cables, review the Planning a Switch Data Stack. Always use a Cisco-approved StackWise cable to connect the switches.

Connecting a StackWise-320 Cable

Procedure

Step 1	Remove the dust covers from the StackWise cables and store them for future use. A StackWise adapter must be installed in the StackWise port to enable stacking. In a default setup, the StackWise adapter blanks are installed in the StackWise ports. If StackWise is ordered with the switch, StackWise adapters are already installed in the StackWise ports, and you can proceed to step 4.
Step 2	Remove the StackWise adapter blanks from each destination StackWise port using the Torx T15 Allen key provided in the stacking kit (or a Torx T15 screwdriver). Store them for future use.
Step 3	Install the StackWise adapter in each destination StackWise port, and secure it in place using the supplied Torx T15 key, or a Torx T15 screwdriver. 1 StackWise-320 adapter 2 StackWise port
Step 4	Align and insert the StackWise cable connector into the StackWise adapter in the StackWise port. Push inwards until the spring latch locks into the slot. 1 StackWise-320 adapter 2 Stacking cable To remove a StackWise-320 adapter from the connector, make sure you press down the spring latch to unlock it from the slot. Removing and installing the StackWise cable can shorten its useful life. Do not remove and insert the cable more often than is absolutely necessary (installing and removing it up to 200 times is supported).
Step 5	Connect the other end of the cable to the StackWise port on the other switch.

Connecting a StackWise-480/1T Cable

Procedure

Advanced Installer Crack is a very powerful advanced EXE, MSI installer (in accordance with Microsoft Windows authentication) packaging tool based on Windows Installer technique. Maybe you are more accustomed to using the NSIS (Nullsoft Scriptable Install System), but I do suggest you to give it a try. It won’t let you down. Free download advanced installer license key crack.

Advanced Installer License key features a friendly graphical user interface, simple and intuitive operation, as well as diverse and complete functions. With its help, you can build installation packages meeting the best Windows Installer standards with ease, without any scripting knowledge required.

Because it is also based on application virtualization/deployment technology, Advanced Installer is more likely used to repackage programs that have been installed and successfully registered/activated, so as to make portable full registered versions of software.

Advanced Installer Features and Highlights

• Makes MSI creation a snap
• Microsoft App-V, AppX – the future of applications packaging is here
• Integrates in automated build tools
• Install and register the resources composing your application
• Advanced Installer Crack Search, download and install Prerequisites
• Organize your application in modules and components
• Secure and choose your package’s presentations
• Extend the installation process with Custom Actions
• Customize the installation User Interface
• Installer Analytics for package monitoring in real time

Advanced Installer Full Specification

• Software Name:Advanced Installer
• File Size: 95.7 MB
• License: Shareware
• Setup Format: Exe
• Setup Type: Offline Installer
• Supported OS: Windows
• Minimum RAM: 1 GB
• Space: 150 MB
• Publisher: filecron.com

How to Crack, Register or Free Activation Advanced Installer

#1: Download and Extract Advanced Installer.

#2: Disable antivirus if needed [Mostly it’s not needed]

#3: Install the Setup file.

#4: Copy the Patch from Crack folder to paste install directory and Apply it.

#5: That’s it, Done…!

Advanced Installer Free Download with Crack

Conclusion

We hope there is no problem to download and install this software or apps in the post. If you see download link error or file not found or any issue. Feel free to Comment or Contact.